













The 400GBASE-DR4 module, MTP/MPO-12 connector, up to 500m over parallel single-mode fiber. It is compliant with QSFP-DD MSA, IEEE 802.3bs protocol and 400GAUI-8 standards.
The 400 Gigabit Ethernet signal is carried over four parallel lanes by one wavelength per lane. It can be used as 4x100G breakout to QSFP-DR-100G. It is a cost-effective and lower power consumption solution for 400GBASE data center.
| NVIDIA/Mellanox Compatible | MMS1V00-WM | Vendor Name | Trxcom |
| Form Factor | QSFP-DD | Max Data Rate | 425Gbps (4x106.25Gb/s) |
| Wavelength | 1310nm | Max. Cable Distance | 500m |
| Connector | MPO-12/APC | Media | SMF |
| Modulation Format | PAM4 | Receiver Type | PIN |
| TX Power | -2.9~4.0dBm | Minimum Receiver Power | -5.9dBm |
| Power Budget | 3dB | Receiver Overload | 4.0dBm |
| Max. Power Consumption | 9W | Extinction Ratio | 3.5dB |
| DDM/DOM | Supported | Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| Protocols | QSFP-DD MSA HW Rev 5.1, QSFP-DD CMIS Rev 5.0, IEEE 802.3bs | Warranty | 5 Years |
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.